Oster Spray Disinfectant
ITEM #:
OS7636 14
Oster® Spray Disinfectant is the fast and effective way to clean and disinfect your clipper and clipper blades. Citrus-scented spray kills germs and fungus and prevents the growth of mold and mildew.
- Acts as a germicidal, fungicidal, staphylocidal, psuedomonacidal, tubercolcidal, and virucidal agent
- Contains no CFS or other ozone-depleting substances
Active ingredients:
Ethyl Alcohol 44.25%
n-Alkyl (50% C-14, 40% C-12, 10% C-16)(dimethyl benzyl ammonium chloride) - 0.33%
a-Pheylphenol - 55.17%
Inert Ingredients:(Contains 0.3% sodium ntirate
This is an ORM-D (Other Regulated Materials-Domestic) product and can only be shipped within the contiguous United States via a ground carrier. It cannot be shipped via the United States Post Office, to a P.O. Box, via expedited shipping (any method that might involve air transport) or internationally. If you have any questions, please call 800-738-3343.
Precautionary Statements: Hazards to Humans and Domestic Animals:
WARNING: Avoid contamination of food and food utensils. In case of contact, surfaces must be thoroughly cleaned with detergent and rinsed with potable water prior to reuse. Causes eye and skin irritation. Avoid contact with eyes.
IF INHALED: Move person to fresh air. If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably by mouth to mouth if possible. Call a poison control center or doctor for treatment advice.
IF ON SKIN OR CLOTHING: Take off contaminated clothing. Rinse skin immediately with plenty of water for 15 or 20 minutes. Call a poison control center or doctor for treatment advice.
IF IN EYES: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lens, if present, after the first 5 minutes, then continue rinsing eye. Contents under pressure. Do not puncture. Do not use or store near heat or open flame. Never throw container into fire or incinerator.
Directions For Use:
Shake well before using.
For Surfaces: Clean soil deposits from surface. Remove protective cap and spray from a distance of 6 to 8 inches until area for treatment is thoroughly moistened. Allow surfaces to dry for a minimum of 10 minutes to ensure disinfection.